Reliance LLDPE Slip Speciality Film 0.9 MFI O19010 is a Linear Low-Density Polyethylene (LLDPE) grade, for General Purpose Applications like Blending for Injection Moulding Drip Lateral and Thick Extruded Products. This grade meets the requirements of material as per IS 12786:1989 on irrigation equipment-Polyethylene pipes for irrigation laterals specification. When incorporated with an adequate quantity of carbon black as specified in clause 4.1 of IS 12786:1989, the pipe made from this grade will meet the creep rapture stress requirement of the PE-25 class of pipe.
Typical Characteristics
| Property | Test Method | Unit | Typical Value* * |
| Melt Flow Index | ASTM D 1238 | gm/10 min | 1.05 |
| Density (23 C) | ASTM D 1502 | g/cc | 0.918 |
| Tensile Strength at Yield | ASTM D 638 | MPa | >13 |
| Elongation at Yield | ASTM D 638 | % | 13 |
| Elongation at Break | ASTM D 638 | % | >500 |
- Typical Values not to be taken as specifications
- Mechanical Properties are on Injection Moulded specimen
Application
General Purpose Application like bending for IM Drip lateral and Thick Extruded Products.
Regulatory Information
Meets the requirements stipulated in standard IS: 10146 on " Specification for polyethene for safe use in contact with foodstuffs, pharmaceuticals, and drinking water" It also conform to the positive list of constituents as prescribed in IS: 10141. The grade and the additives incorporated in it also comply with the FDA: CFR Title 21,177.1520. Olefine polymers
Storage Recommendations:
Bags should be stored in dry/closed conditions at temperatures below 50 C and protected from UV/direct sunlight
